- Positive / Negative / Net flow totaliser. Water Volume m3 / Heat Energy Kwh.
- Die-cast aluminium weather-resistant enclosure (standard versionm IP65).
- RS-485 interface, Complete communication protocol for instrument networking.
- 2 x 20 character, LCD display.
Description
The Pegasus BM Series BTU Meter is a fixed ultrasonic Heat Meter for continuous measurement of volumetric flow and heat energy. Ultrasonic BTU meters or heat meters are now widely used in the industrial and building sectors for monitoring cold / hot water systems and energy efficiency monitoring. These BTU meters can be used on virtually any pipe size or material, are non-invasive and therefore not prone to the levels of deterioration that are seen by intrusive flow meters.
Hardware & Software Specifications
| Technical parameters | Transducer Type A | Transducer Type B |
|---|---|---|
| Pipe size (mm) | DN25-100 | DN50-700 |
| Pipe size (inch) | (1” – 4”) | (2” – 28”) |
| Installation method | V : (N or W) | V : Z |
| Temperature sensor Type |
3-wire PT100 RTD | |
| Temperature sensor Location |
1 x Supply Line and 1 x Return Line | |
| Temperature Sensor Range |
-10 to 220°C | |
| Calibration | Yes | |
| Magnetism | No magnetic influence | |
| Temperature | 0 °C – 160 °C | |
| Protection class | IP65 | |
| Dimension (mm) | 90x85x24 | 90x82x29 |
| Weight | 94 grammes | 150 grammes |
| Liquid types | Water, Hot / Cold Water | |
| Pipe material | All metals, most plastics, fiber-glass, etc. |
Hardware Dimensions
