EPIT004131 temperature immersion type transmitter provides a stable, repeatable, reliable and accurate means of measuring temperature in the pipe or tank. The polymer capacitance sensor used in the EPIT004131 is not affected by any condensation, high humidity or contaminants present in the measure environment.
The EPIT004131 sensor is inter-changeability without the need of recalibration because of the used of miniaturized electronics. The EPIT004131 is a plugged-in construction that ensures a rapid and easy installation, thus greatly reduce installation and maintenance costs. Sophisticated integrated circuits design provides a fully temperature compensated 4-20mA-output signal. The EPIT004131 enclosure is made of ABS plastic.
| Power Supply: | 12 – 24Vdc |
|---|---|
| Power Consumption: | 6 VA (including transmitters) |
| Input A/D Resolution: | 12 bits |
| Sensing Range: | -40 Deg C – 150 Deg C |
| Output Signal: | 1 x 4~20mA |
| Accuracy: | ±0.1°C |
| Response Time | 10s (still water) / 10s (with pipes 3m/s water speed) |
| Communication: | 2 wire RS-485 |
| Baud Rate: | 9600~76.8kbps |
| Protocol: | Modbus RTU |
| Surge Protection: | 15KV ESD for serial port |
| Operating Condition: | 0~+70°C / 0-100% RH, non condensing |
| Storage Condition: | -20~+70°C / 0-100% RH, non condensing |
| Probe Length: | 257 mm |
| Protection: | IP65 |
| Weight: | 450 g |
